As a hybrid actual property photographer and videographer, pace and effectivity are the secret. Something I can do to avoid wasting time can add up over the course of a protracted day.
One of many ache factors in my enterprise is the organising and breaking down of my gear. Particularly the time it takes to breakdown, put away, reopen and rebalance my gimbals.
All these additional steps are time consuming and trigger loads of stress. As a rule, I’ll discover myself folding up the balanced gimbal and inserting it behind my automotive. The again of my automotive is the place gimbals go to die. There, they get tossed about, scratched up and often broken.
I am going by means of the typical gimbal in lower than a 12 months as a result of breakdown and setup are such a ache level for gimbal shooters like me who transfer from place to put all through the day. Setup is so time consuming it’s nearly price it to me to switch my gimbals yearly. There needs to be a greater manner.
Convey on the MVG300XM, with it’s tremendous quick and straightforward arrange
Transferring from job to job, when it comes time to shoot the video, I’ll waste 5–10 minutes or extra balancing the gimbal. I’d usually wished somebody would give you a extra environment friendly approach to steadiness my gimbals. I’m so glad to say with the MVG300XM, Manfrotto lastly has!
So easy, but such a recreation changer
So as to get setup and balanced quicker, Manfrotto included “reminiscence dots” on two of the three arms of the gimbal. The pan and the roll axis have these adjustable crimson reminiscence dots that insure gimbal balancing is fast and environment friendly.
In case you’re something like me and you utilize the identical setup incessantly, the reminiscence dots are an enormous time saver! All I’ve to do now could be set the 2 axises on the dots after which solely steadiness my pitch axis. It’s not all the time good out of the field, however I’m averaging round three minutes from opening up the case to balanced and able to go. If I’ve to steadiness all three axises it takes me 5–7 minutes or extra. I acknowledge this will likely appear trivial, however after I’m capturing three, 4 or 5 properties it will possibly make all of the distinction.
Setting it up
- The primary time setting it up, you’ll need to laboriously undergo the method of balancing the gimbal and discovering the right middle of gravity.
- I all the time “auto tune” earlier than I begin filming. It solely provides 5–10 seconds to setup, but it surely’ll eradicate any undesirable gimbal shake/buzzing
I do know calibration is one additional step — however within the case of the 300XM auto tuning actually takes lower than 10 seconds. I’ve really timed it.
- When you’ve discovered your middle of gravity for a given digital camera and lens combo, set your reminiscence dots
- The subsequent time you are taking your gimbal out of the case, two-thirds of the method shall be pre-balanced and arrange shall be a snap
Simplicity!
That’s it! I nearly want it had been extra sophisticated. One of many most important causes I risked my gimbal to the perils of getting tossed round was as a result of I didn’t need to take care of lengthy arrange occasions. Manfrotto has made gimbal setup so fast and straightforward with the 300XM. As of late it’s my go-to gimbal for actual property as a result of 300XM saves me a lot time!
